1. Rinse sheet with lukewarm water.
2. Wash sheet with mild soap and lukewarm water.
3. Use sponge or soft cloth and gently wash to loosen remaining dirt and grime. Do not scrub, use brushes or abrasive cleaners: the interior and exterior surfaces are not scratch resistant.
4. Repeat rinse and dry with a soft cloth to prevent water spotting.

Cautions:

• Do not use abrasive or alkaline cleaners.
• Never scrape with razor blades or other sharp instruments.
• Benzine, leaded gasoline, acetone or carbon tetrachloride should never be used.
• Do not clean in hot sun or at elevated temperatures.

Before drying, these conditions can easily be remedied by rubbing lightly with a good grade of VM&P naptha, isopropyl alcohol, or butyl cellosolve.

Afterwards, a warm final wash should be made using a mild soap or detergent solution and a thorough rinsing with clean water.

Label and Sticker Removal

The use of kerosene, VM&P naptha, standard solvents or petroleum spirits are generally effective in removing labels and stickers. A warm wash and rinse should always follow the use of these products.

In cases where the sticker material, such as vinyl, does not allow the penetration of solvent, the application of heat (a hair dryer, for example) will soften the adhesive and promote removal. Caution: Excessive heat can cause surface damage.